[Elecraft] External KPA100

[Leo Starrenburg PA5LS]

Hello Lyle,

thanks for the answers and your patience, this is clearly a case of reading
the manual first.

I found John's website before yours, apart from the audio- and supply lines,
he uses another wiring diagram for the KPA~EC2 IO link than you do, but it
works ok.

Thanks again,

73'  Leo.


> > The 270R 2W metalfilm resistor must be pure resistance ie: 0j ?
>
> It shouldn't be a wirewound "lossy inductor" style.  Metal film is best,
> carbon composition is probably OK.  It gets hot...
>
> > What happens to the KAT1 in the K2 ? Is it automatically set to
> > "carry-through" mode ie; 0 cap. and 0 ind. at "Pa Ps ON" or
> > should I do this
> > by hand when I want to use the external KPA100 ?
>
> When the K2/100 powers up, if it detects the KAT2 it puts it in the
correct
> mode automatically.  See the notes on my web page about this.
>