[Elecraft] K2/100 #2700

[Phil Wheeler]

Michael E Tucker wrote:

>I completed the KPA100 today but for the time being the K2 is still running QRP.
>During my test and alignment phase, I noticed that when setting the power to
>11 Watts with the PA on, the voltage display drops to 8.5V, 3.4-3.5A and the fan
>comes on immediately.
>

In addition to the power supply, check the cable from the supply to the 
PA.  I had a poor connectin that caused a low voltage (around 11 V) 
until I discovered why.

73, Phil