[Elecraft] (no subject)

Thu Jul 4 17:33:01 2002

 It should also be mentioned that the second filter mod only works if using
OP-1.

Regards,
Robert,
VE3RPF

----- Original Message -----
From: "Don Brown" <[email protected]>
To: <[email protected]>; "Elecraft" <[email protected]>
Sent: Thursday, July 04, 2002 2:43 PM
Subject: Re: [Elecraft] (no subject)

Hi

OP1 - OP5 are all the same and select the SSB module. I guess the other
OP3-5 may be for future filter modules but for now OP1 is used on transmit
and OP2 is used on receive. You can set up the filters for OP2- OP5 and
shift the BFO setting for each to simulate IF tuning

Your tinny sounding audio sounds like you need to install the filter
flattening mod and set the SSB filter with Spectrogram

Don Brown
KD5NDB
----- Original Message -----
From: [email protected]
Sent: Thursday, July 04, 2002 12:14 PM
To: [email protected]
Subject: [Elecraft] (no subject)

Hi,

What is the difference in OP1-5?  I know that the OP's are supposed to
cover SSB and CW scanning at the same time.

Daniel
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com