[Elecraft] WWWV for calibration.

Tue Jan 22 11:15:00 2002

We heard you the first time<g>.

I'm not sure I'm gonna worry about mine being 10 Hz low (or is it high? =
10000.00 =3D 590 Hz audio against 0.6 St-P). Naw.

Dan

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of lhlousek
Sent: Tuesday, January 22, 2002 11:08 AM
To: Dan Barker; [email protected]
Subject: Re: [Elecraft] WWWV for calibration.

<<I'm assuming that using WWV to calibrate should show a 600 Hz CWn tone =
with
10000.00 MHz on the freq display when the  Sidetone Pitch is set to 0.6 =
KHz.>>

That's correct.  In CW mode, the receiver is offset from the displayed =
(and
transmit) frequency by the side tone amount so that the carrier beat =
note will
match the sidetone pitch when 10000.00 MHz is displayed.

Lou W7DZN

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.=20
Postings must be plain text (no HTML or attachments).=20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com