[Elecraft] Further K2IO issues with TRlog and LogEQF

[Paul Erickson]

Well, it looks like I was partially right before. My rig sort of works 
with TR. I can switch bands
with alt-v/alt-b, but found that I couldn't place calls in the band map 
without being asked to
enter a frequency. Also, when I exit the software, change the band on 
the rig, then restart
the software, it comes up in the last band the software was, but does 
not detect the new
band on the rig. Alt-V or Alt-B will bring them back into syncronization.

The above would seem to indicate that there is a probelm with the line 
going from the
rig to the computer, ie. the rig is receiving data from the computer, 
but the computer
is not receiving data from the rig.

The cable appears to be ok. I am using one of the field test K2IO 
boards, and thought
I had performed the duplex mod correctly. Any thoughts as to the likely 
culpret
(other than myself, of course...)

Also, according to the manual, I should be able to select a 48h option 
in the port
menu. With mine, I can only turn the port on or off. And yes, I have the 
correct
side tone option selected.

Any suggestions where I should be looking first when I tear things apart 
again.?

Thanks in advance.

-- 
cheers, Paul - VA7NT (ex VE7CQK) - email: paule@sfu.ca

"Those who hear not the music, think the dancers mad..."