[Elecraft] Wrong Parts ?

Sun Jan 20 23:06:10 2002

Yeah, I had a bad part in my kit too. Very very bad. It jumped out of my =
plyers (one of those bottom parts, with the leads already trimmed off) =
and hid on the floor for about 20 minutes. The broom (and magnifying =
glass) finally found it. (no 10 ohm in the junk box, and very late at =
night. I HAD to keep looking).

Dan / WG4S

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of David A. Belsley
Sent: Saturday, January 19, 2002 7:26 PM
To: Sean Baxter; [email protected]
Subject: Re: [Elecraft] Wrong Parts ?

Sean:
  Can't speak to the cap, but sometimes the orange and brown can look=20
close.  Did you put the resisitor on your ohm meter?

best,

dave belsley, w1euy

--On Saturday, January 19, 2002 1:56 PM -0500 Sean Baxter =
<[email protected]>=20
wrote:

> Anyone get any wrong parts in these kits? I assume they are wrong =
parts
> and not replacements for values in the schematics.
>
> I have run across two in instances. The audio kit, R4 on bottom to be =
a
> 47K (yellow-violet-orange) what was in the kit was 470 ohms
> (yellow-violet-brown). In the SSB kit, C14 is to be a 22 uF value, =
what
> was included was a 2.2 uF value.
>
> I assume these were errors and put in values that were listed in the
> schematics.
>
> Sean - K3XT
># 2311
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com

----------------------------
David A. Belsley
Professor of Economics
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.=20
Postings must be plain text (no HTML or attachments).=20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com