[Elecraft] Re: clock on K2 adjustment

Thu Jan 17 08:47:00 2002

Don:
  The step you are most likely missing is that the adjustments must be made 
right after you turn the K2 on. So turn on, push Display to get clock, Push 
band plus and minus (together) to get date, set date as per manual, push 
band plus and minus again to get clock, set clock, push band plus and minus 
again to "lock in your settings."  Then bow out of clock mode as you will. 
The idea is: unless you set the date first thing you do after turning the 
K2 on, the K2 will assume you are not setting the clock and will "lock" the 
information so it cannot accidentally be reset.

best wishes,

dave belsley, w1euy

--On Wednesday, January 16, 2002 9:40 PM -0800 Don Minkoff 
<[email protected]> wrote:

> I need a bit of direction in re-setting my clock with the KAF2 option.
> I initially set it fine but 30 seconds fast.
>
> How do I reset it?  Following the directions by tapping display and then
> using band + or Band - doesn't do a thing.  What step am I missing?  I
> have Rev A, Aug. 30, 2001.
>
> --
> Don Minkoff - NK6A
> K2 #1217
> K1 # 844
>
> Mar Vista, CA
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com

----------------------------
David A. Belsley
Professor of Economics