[Elecraft] K2 and HW-101?

Tue Jan 15 13:30:02 2002

Speaking of external linears...I have been thinking about modifying my
HW-101 for use as an outboard amp for the K2.  I wonder if anyone has done
something similar (or equally insane).

Should be an interesting combination...Elecraft and Heathkit...

-----Original Message-----
From: Steve Carey <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 15, 2002 1:24 PM
Subject: [Elecraft] K2 + External Linear . . .

>OK so there is info for TR switching of an external Linear Amplifier . . .
>BUT what about ALC I/P socket on the back panel! Where and how should it be
>interfaced?
>
>Any one who has had problems fitting the Tilt Stand. Mine had to be "Sprung
>" under GREAT tension to make it fit between the two feet, so-much-so that
>it buckled the bottom panel!. When I removed it, the panel returned to
being
>FLAT. The answer, try it, then judge how much to squeeeeze it in to reduce
>the O/A length permanently , then fit it. ( don't squash it in too much, or
>it'll be loose!
>
>Steve/G4MJW
>PS: Now had 8 QSO's on my K2 . . . . the latest: T99A on 21.207 SSB could
>not beleive I was only using 10 Watts!
>
>_______________________________________________
>Elecraft mailing list: [email protected]
>You must be a list member to post to the list.
>Postings must be plain text (no HTML or attachments).
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com
>