[Elecraft] High Power PA Option vs. Auto-Tuner and Battery Options

[lhlousek]

<<I know that I'm going to get the SSB since I'm not yet where I
need to be with code.>>

Sounds more like a reason NOT to get the SSB option ;-)

The KAT2 won't handle the power of the KPA100 but, eventually, there will be an
ATU for the KPA100. The KPA and its ATU can be built into the accessory
enclosure. When the KPA100 and it's ATU are attached, the K2 will recognize it
and control them as if they are installed, bypassing the KAT2.

I'd recommend sticking with 10W and getting and KAT2.  The KNB2 is simple to add
and is helpful if you have noise of the type it is designed to handle. The KAF2
is a very nice addition too (particularly for CW) but it can be added at any
time.

Later, the KPA100 and it's ATU can be added in the outboard enclosure.

Then you'll have a great portable QRP rig which converts to a great QRO rig
simply by plugging into the amp.

Lou W7DZN