[Elecraft] Product Idea

Fri Jan 4 08:33:37 2002

>>I agree!  But to meet FCC regulations the coffee mug would have to be
 >>completely inoperable unless attached to the K2 for which it was designed

This is easily accomplished through the use of a drinking straw.  The straw
will effectively keep the mug attached to the K2, and render it a passive
element in the drinking circuit.

Jim,
N2SUB

PS - thanks for taking this in the spirit in which it was intended  ;-)

----- Original Message -----
From: "Dave Gingrich K9DC" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Friday, January 04, 2002 7:14 AM
Subject: RE: [Elecraft] Product Idea

> At 23:12 1/3/2002 -0800, Ron D' Eau Claire wrote:
>
> >Har! My K2 heat sink never gets warm to the touch. I like my coffee
warmer
> >than that! Now, the KPA100... that heat sink IS on the top. Maybe they
could
> >feature a cutout so a coffee cup would snuggle right into the heat sink
> >itself. When the coffee starts boiling it's time to start listening and
> >sipping a bit...
>
> I agree!  But to meet FCC regulations the coffee mug would have to be
> completely inoperable unless attached to the K2 for which it was designed.
>
> ================================================
> Dave Gingrich, K9DC - Indianapolis, Indiana  USA
> K2 #2211, K1 #931, QRP-L #2376, ARS #1109,
> FPQRP #389, IRLP #473, k9dc.ampr.org, CCIE #6748
> ================================================
>
> _______________________________________________
> Elecraft mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>