[Elecraft] M3LOK = K2 - 10m

[Nicholas Lokuciewski]

Thankyou again for all you replies, this one was useful:

>Firstly, there is no restriction on anyone importing a K2 kit from the 
> >States and I doubt if the RA are really interested if you have a radio 
> >which could operate on other frequencies/bands. OK so it's in black >and 
>white . . . just build the kit leaving out the bandpass filter >coils and 
>LPF toroids for Top-band and ten meters!!!!  In the case of >top-band, it 
>uses an "Add-on" module . . . just don't buy it. Almost >every modern HF 
>transceiver has a general coverave RX and the tx WILL >transmit over the 
>whole range buy just removing or adding a diode or >two in the synthesiser.

So could some devise a mod that would disable 10m by removal of toroids, 
coils, etc... As I am sure this would be useful to others and as mentioned 
above I'm sure the RA wont mind if the rig 'can' Tx outside the UK bands by 
+/- 0.2MHz.

73 2E1LOK Nicholas

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx