[Elecraft] K2/100 question

Mon Feb 25 19:47:02 2002

OK,
  I've been trying to follow this thread but I guess I'm too easily
confused.

Just tell me if the 100 watt amp add-on (I, know,its not an add-on its
really part of the K2 I bought two years ago)  is out yet, or what.

Thanks
Tom
WB2QDG
K2 s/n 1103

Friend of Bill W.
   ---  If you are too, drop me a line.
-----Original Message-----
From: Eric Swartz WA6HHQ - Elecraft <[email protected]>
To: David A. Belsley <[email protected]>
Cc: kb1dxc <[email protected]>; [email protected]
<[email protected]>
Date: Monday, February 25, 2002 7:38 PM
Subject: Re: [Elecraft] K2/100 question

>If you want to run totally in QRP mode, regardless of if you are above the
11W
>power setting, just power off the PA 13.8V supply and supply power to the
K2
>through its regular 2.1mm power connector. (Both power connectors are diode
>isolated from each other and can be powered concurrently.) The K2
automatically
>detects when the PA power supply is turned off or on.
>
>73, Eric  WA6HHQ
>
>
>"David A. Belsley" wrote:
>>
>>   This feature is very cute, but is there a possibility of having the
>> switch-over threshold set in the menu.  It is nice to be able to run the
K2
>> barefoot at 15 or so watts without having the PA cut in?
>> dave, w1euy
>_______________________________________________
>Elecraft mailing list: [email protected]
>You must be a list member to post to the list.
>Postings must be plain text (no HTML or attachments).
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com