[Elecraft] K2/100 question

Mon Feb 25 19:31:01 2002

Eric:
  This feature is very cute, but is there a possibility of having the 
switch-over threshold set in the menu.  It is nice to be able to run the K2 
barefoot at 15 or so watts without having the PA cut in?  Or maybe the 
threshold ought simply be set a bit higher, since few are going to want to 
use the 100PA at 15 or 20 watts anyway.

best wishes,

dave, w1euy

--On Monday, February 25, 2002 4:06 PM -0800 Eric Swartz WA6HHQ - Elecraft 
<[email protected]> wrote:

> When the K2 power setting is set to below 11W it automatically bypasses
> the final 100W stage and operates in a finer resolution QRP mode. Turning
> the power control up above 11W switches back into 100W mode.
>
> 73, Eric  WA6HHQ
>
>
> kb1dxc wrote:
>>
>> Hi Folks,
>>
>>         Does anyone know if the K2 will still be usable as a QRP rig
>> while the proposed 100 watts is part of the rig? I would hate to
>> think that every time I wanted to run QRP that I would have to switch
>> the lid.
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com

----------------------------
David A. Belsley
Professor of Economics