AW: [Elecraft] K-2 SN 2493 on the air

Sun Feb 24 07:18:00 2002

Werner,
due to the German DIN regulations, an Pb accumulator never should be
allowed to work below 10,8 Volts because it starts sulfating and will be
destroyed below this Voltage.

(1,8 V per cell is lowest rate, 6x1,8=3D10,8)

73 de Peter,=A0 DL2FI
**********************************************************************
DV Berlin DARC e.V.
German QRP Group DL-QRP-AG http://www.dl-qrp-ag.de
QRPproject QRP and homebrew international http://www.qrpproject.de

> -----Urspr=FCngliche Nachricht-----
> Von: [email protected] [mailto:elecraft-
> [email protected]] Im Auftrag von werner haschke
> Gesendet: Sonntag, 24. Februar 2002 02:08
> An: [email protected]
> Betreff: [Elecraft] K-2 SN 2493 on the air
>=20
>=20
> Just wanted to let you know K-2 SN 2493 is on the air. I had just got
the
> 160 mod and the atu installed and will wait to install the ssb mod
when I
> get through the burn in stage. Had a concern on output but seems with
a 15
> volt battery the 12-15 watts is attainable but less than 11 volts
seems to
> run a bit low on the output power.
> Hope to work all the K-2's I can.
> 73es
>=20
> WA8VNE
> Werner
>=20
>=20
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com