[Elecraft] KFL1-4 Trimmers

Tue Feb 19 13:41:01 2002

On Tuesday 19 February 2002 13:12, Jerry Ford wrote:
> Too the group:
>
> I just started building my KFL1-4 and the kit has the ( blue boddy )
> upgarded trimmer pots in it.
> Instructions call for the flat side to match the diagram on page 4 of
> the KFL1-4 manual.  Simple enough but as I look at these pots,  they
> have what could be considered a " flat side "    on both sides of the
> pot.
> My question to the group is which flat side is the      " flat
> side "   ??
> The boddy on these pots is smaller on one side than the other so is
> the small side considered the flat side or the big side??
> Thanks in advance:           Jerry         N0JRN

-- 

Use an ohm meter, from the screw on top, to the leg on the "flat side" of the 
trimmer CAPACITOR should be a short.
   --------------------------

      John L Sielke   W2AGN
       [email protected]

   http://www.qsl.net/w2agn
        Trustee: W3IYQ