[Elecraft] k-2 linearization

Sun Feb 17 03:28:01 2002

Werner:

I am looking at the "errata" sheet dated October 2, 2001, which assumes that
you have the new firmware (revision 2.01 or higher).  Item 14 says "if you
see INFO 232 during CAL PLL, make sure 40m is selected and that the counter
cable is on test point 1 (VCO)."  80 meters takes care of itself.

73
Alan
W1HYV

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of werner haschke
Sent: Saturday, February 16, 2002 10:59 PM
To: [email protected]
Subject: [Elecraft] k-2 linearization

I have just built the k-2 with the normal hairpulling experiences but am
stuck on page 73.
I can run the linearization on 40 meters and it looks good, everything has
been very close to the specs but now try to linearize 80 meters I get a info
232 which I can't find in the troubleshooting guide. I can even peak all the
cans for all bands in transmit at 2 watts and it looks great.
what am I seeing and what is info 232????
Thanks for any help

Werner Haschke
[email protected]

k-2 #2493

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com