[Elecraft] Switching rf filter boards in K1

Thu Feb 14 21:23:00 2002

Hi Randy:

I too have just built the K1 (#1002) and it works great !!  I made my first
QSO with it yesterday.  I have two 2-band filter boards - one for 20/40 and
one for 15/17.  You set up the other filter board just like you did the
first one.  Everything is saved and it's plug and play.  BTW, 15 meters is a
little problematic - I was finally able to coax 4.8 watts out after starting
with 3.8 watts.  Save one of your plastic bags and put the other filter
board in it and just switch them out when you need to.

Now on to the K2 !!!  Beginning inventory now.

Jamie
WB4YDL

> From: "Randy Horn" <[email protected]>
> Date: Thu, 14 Feb 2002 19:21:45 -0500
> To: [email protected]
> Subject: [Elecraft] Switching rf filter boards in K1
> 
> Just built a K1 with 2 band filter board for 20 and 40.
> The rig works great and exceeds my expectations, so now I wish I had built
> the four band version.
> Thinking about purchasing an additional 2 band filter board, but have a
> question...
> When you switch filter boards in the K1, do you have to reconfigure and
> adjust the 1) band assignments and 2)the operating frequency calabration.
> (How could this be done in the field?)
> Tnx fer info, Randy AA1UN
> 
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 