[Elecraft] K2 - Took the plunge!

Tue Feb 12 15:41:18 2002

Kirby,

You have started off almost in the exact same way I did.  I started off by
building a Small Wonder Labs DSW-40 and then the K2.

Just take your time and enjoy it.  Use good soldering techniques and take
the time to check your solder joint with a meter after every-so-many
components.  It will slow you down some, but be worth it in less
troubleshooting later.

73 and welcome aboard,
WA5PB
Bill Allen
K2#1068

----- Original Message -----
From: "Kirby Davis" <[email protected]>
To: <[email protected]>
Sent: Tuesday, February 12, 2002 10:45 AM
Subject: [Elecraft] K2 - Took the plunge!

Fellow K2 enthusiasts,

Thank you for your previous words of wisdom and encouragement to my comments
and questions. They were very helpful.

Now that I have some experience after building a Small Wonder Labs PSK20 kit
I
think I'm ready to tackle the K2! Therefore, this morning I placed my order
for a K2 along with the KSB2, KNB2, KBT2, KAF2, and MH2 options.

Just wanted to thank you all and let you know that you might be seeing a few
posts coming from me if I can't find what I need from the archives, etc.
You've been forewarned! :-)

Thanks again,

Kirby
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com