[Elecraft] I >>like<< the K2 knob

Fri Feb 8 08:40:00 2002

I second that emotion...seems like it would be a nice "upgrade" to the
firmware to have that capability as an option.  It would kick in to the next
higher rate if the knob is turned at a particular rate (or higher) for n
seconds, then return to the slowest rate when it is stopped.

----- Original Message -----
From: "Steve Lawrence" <[email protected]>
To: "Garth Hitchens" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, February 07, 2002 11:18 PM
Subject: Re: [Elecraft] I >>like<< the K2 knob

Garth,
I find myself reaching for the Rate key to "glide" up and down the band.
Perhaps the real improvement is "velocity sensing" firmware:  turn the
knob fast, and the frequency step rate increases alowing a quick QSY
across the band, turn the knob slow and fine tune that elusive CW signal.

Wayne.... is this doable?

BTW, when might the K2 software become "flash upgradable"?

Steve
aa8af

"Garth Hitchens" <[email protected]>
Sent by: [email protected]
02/07/2002 06:52 PM

        To:     <[email protected]>
        cc:
        Subject:        [Elecraft] I >>like<< the K2 knob

Ok, I know I'm in the miniority here, but I've read so many messages
bashing
the K2's knob, I had to chime in.   I really LIKE the K2 knob.

I got used to tuning my Kenwood 850 without the "dimple" - my finger would
simply graze and slide on the face of the knob, without ever hitting the
edge.   AFter a while, I kind of "liked" this way of tuning, and was able
to
pretty accurately "spin" the vfo by using a little pressure on the front
of
the knob.   When I tried to tune a kenwood 570, it felt wrong, because
that
technique doesn't work when a dimple exists.   I prefer the flat knob
face.

The K2 works the same way for me. Sometimes I'll let my hand rest on the
top
of the K2 and use my thumb on the knob face.  Sometimes I'll let my hand
sit
on the desk and use my index finger on the knob face.  Either works fine.
Never been bothered by the sharp edge, because I don't ever touch the
ribbed
side or the edge of the knob, just the face.

I do have a major beef with the K2's tuning though - too much turning
needed
to move the VFO.   I'd like to see a single turn cover a lot more area
(more
like the K1) without having to give up resolution (still 10hz steps).   I
love using the K1 because the VFO feels so quick and agile compared to the
K2.   This isn't something a new knob can fix, though.   If someone has
come
up with a mod for this I'd love to try it - I assume it would involve
replacing the encoder and maybe software changes.

Garth KG7GA

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com