[Elecraft] K1 flickering ATTN LED with new KBT-1

Fri Feb 1 02:14:00 2002

I also just installed the KBT-1 in my K1 (#1065), just about a half hour
ago.  I just checked, setting my display "Battery Voltage", and guess what?
My "ATTN" led is also flickering.  Now that my lights are dimmed on my shack
I notice it; earlier with my light all on I did not notice the flicker.

> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Alan Kamman
> Sent: Thursday, January 31, 2002 6:04 PM
> To: Elecraft
> Subject: [Elecraft] K1 flickering ATTN LED with new KBT-1
>
>
> Just to let everyone know, K1 #1012 is on the air and doing fine in
> Vermont!  Today, however, I completed the KBT-1 battery pack option.  It
> works fine too but here is the thing.  When I choose battery voltage
> with the display button, the ATTN LED flickers very faintly.  This
> occurs under battery power and also with the usual power supply with the
> batteries removed.  It also occurs regardless of whether the LED
> capability is on or off.  It only appears to happen when the battery
> voltage display is on.  Anybody have any ideas how to eliminate this
> issue?  This didnt happen prior to adding the KBT-1.
> 73,
> AL  W1SA
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com