[Elecraft] UK supplier for Amidon toroids

[Dave]

Julian

You could try Ferromagnetics, PO Box 577, Mold, Flints, CH7 1AH. They have
an advert in the back of the January 2003 Radcom, sadly no phone number, web
site or e-mail...

I've made "QRP" baluns using all sorts of ferrite, even those found in old
PC power supplies and on the wiring within PCs. Make two baluns and connect
them "back to back", then try them at 100 Watts or so from 1.8 to 30 MHz
into a dummy load. If you get a good SWR and negligible loss, they should be
fine for QRP!

73's Dave, G4AON

----- Original Message -----
From: "Julian (G4ILO)" <g4ilo@qsl.net>
To: "Elecraft List" <elecraft@mailman.qth.net>
Sent: Sunday, December 29, 2002 4:13 PM
Subject: [Elecraft] UK supplier for Amidon toroids


> I wonder if any of the G members of this reflector can help me locate a
> supplier of Amidon toroids in order to make a 4:1 QRP balun for an antenna
> experiment. The only supplier I can find who sold these in small
quantities
> was Kanga Electronics, but their web page informs me that they ceased
> trading at the end of October.
>
> 73 and a Happy New Year,
> --
> Julian, G4ILO. (K2 #392)
> Homepage: http://www.qsl.net/g4ilo
>
>
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>