[Elecraft] Query on BFO alignment

[Gregg R. Lengling]

I'm in the process of building my Christmas present from my wife....K2 =
S# 3075 (with all the options...she's a big spender), and I'm doing just =
fine.  I was just doing the BFO Test and I've got a range of 3.77kHz =
which according to the book is good (must be equal to or greater than =
3.6kHz).  However the BFO high freq is >=3D4916.3 (actual reading =
4916.86) but the BFO Low Freq. is supposed to be <=3D 4912.7kHz (actual =
reading is 4913.09)....now that means my low reading is meeting =
spec....is this a problem.  The  4MHz oscillator calibration is done =
properly (Used an IFR1200S to smell the oscillator and the IFR is in =
calibration). =20
So is any of this minor descrepancy a problem...or should I just =
continue onward????
Thanks in advance ....

Gregg R. Lengling, W9DHI
PSYCHOLOGY:  The science of inventing words for things that do not =
exist.


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---