[Elecraft] 60 meter transverter

[Jessie Oberreuter]

Sorry, y'all were probably talking about a non-Elecraft 60m device :).
Teach me to post from bed :).


On Sat, 21 Dec 2002, Jessie Oberreuter wrote:

>
>      Just to make sure we're on the same page, I believe the 60m xvert
> option is /two/ things -- a 60m band module for the K2 (just like 160m
> comes separately), and a tranverter interface option on the same board.
> For 60m, you'll just operate your K2 normally; if you have a transverter
> for another band, you will be able to plug it into the forthcoming
> transverter in/out ports.  Until it appears, you can drive units with
> built in TR switching (eg TenTec, DEM with the AOS adaptor) via Ant1/Ant2,
> and xverters with separate TX and RX (eg DEM, Microwave Modules, etc.)
> with TX out on Ant1/Ant2 with a pad, and RX coming in through the 2nd RX
> antenna on the 160m board.
>
>
> On Fri, 20 Dec 2002, Trevor Day wrote:
>
> > Transverter output power is a function of the transverter, not the K2.
> > The K2 supplies 1 or 2 watts drive (settable) which may well need
> > attenuating before being applied to the transverter.
> >
> > In message <3E00E929.31336.5D2757@localhost>, Keith <n6jpa@wvi.com>
> > writes
> > > Do you need an external amplifier with the 60 Meter transverter? I was
> > >reading that the power out for other transverters was a few milliwatts with
> > >the K2.
>
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>