[Elecraft] SSB Adapter Question and a Gremlin

[Rich Lentz]

Dale:

Yes R60 is a fixed 100 ohm resistor on serial # 3000 and above.

Rich
KE0X

---------------

Hi all;

Built the KSB2 and KIO2 modules this weekend.  One question.  On page 19
of the KSB2 manual, it asks me to set R60 on the RF board fully counter
clockwise.  On my board (#3064) R60 is a fixed 100 ohm resistor and the
PA Bias schematic also shows this as a fixed resistor.  I assume this is
a design change with the newer main board, and needs to be added to the
errata sheet for the KSB2 board?  If I am wrong and there is a pot
somewhere I need to tweak, please let me know.