[Elecraft] Dressing Up the Back of the K2/100

[Unifiedtx@aol.com]

Has anybody found some nice looking caps to cover the unused BNC connectors 
on the back of the K2, KPA100 and the KAT100-1, replacing the black plastic 
ones.  I bought some 50 ohm BNC terminators (for computer network 
applications) from Radio Shack. I found that plugging in one of these 
terminators into the 50 ohm BNC K2 jack loaded down the receiver input 
because the 50 ohm terminator was in parallel with the receiver curcuit going 
through the KPA100.  I saw a BNC cap in the Mouser catalog, but it was a 
shorting type, and that certainly wouldn't work on the K2 jack.  I wonder if 
there is such a thing as a BNC cap without the inside guts.  If anybody knows 
where such caps can be found, please let me know.  Thanks   Roy Morris  W4WFB 
 KAT100-1, K2/100 #2225  


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---