[Elecraft] reminder to K2/100 owners: tighten PA hardware

[Wayne Burdick]

If you've built a KPA100 option for your K2, and have operated it for a while,
don't forget to re-tighten the PA hardware as described in the KPA100 manual.
This hardware *will* loosen slightly over time (about 1/8th turn), worsening the
thermal bond between the transistors and the heat sink. You should only have to
do this re-tightening step once, ideally after the first week or two of use.

73,
Wayne
N6KR


-- 

http://www.elecraft.com