[Elecraft] Re:PA Fan

[WA9GQT@aol.com]

The LoHi fan mode seems to be the logical choice to keep the K2/100 cabinet 
temp under control.  We need to keep VFO drift to a minumum.  I usually keep 
my power turned down to 10 watts when I am listening; that way the fan is not 
on. The fan only turns on low when power is cranked up to 11 watts or higher. 
 
       Eric, it would be great to see a software change around this.  Change 
it so that the fan will go to low when transmitting and then when heat the 
sink reaches the higher value, then the fan goes to high.  This way one does 
not have to ride the power control back down when just listening.  
       Another thought would be to have 2 difference sense points; one for lo 
fan speed and the other for high fan speed.  Just some thoughts.  
 
73, 

Rod WA9GQT  K2/100  #1900 
       


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---