[Elecraft] Higher pwr output on K2 on CW causes 'GAWK'

Mon Dec 2 14:27:01 2002

My K2 behaves like this if I run it from a power supply or battery that
cannot supply enough current so that the voltage falls below about 9-9.5
Volts during transmission.

Sverre
LA3ZA

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Daniel
> Sent: 2. desember 2002 15:35
> To: [email protected]
> Subject: [Elecraft] Higher pwr output on K2 on CW causes 'GAWK'
> 
> 
> Higher pwr output on K2 on CW causes 'GAWK'
> 
> Hi,
> 
> Last time I posted this message I forgot to mention that I 
> have only the K2.  I operate CW past 0.1W and get a vibrating 
> 'GAWK' coming from the speaker.  What is my problem?
> 
> Daniel
> kg4dni
> K2 only
> 
> ___________________________________________________________
> TruthMail ...changing email forever!   http://www.truthmail.com
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 
> 