[Elecraft] FS: KTS1, Weller WTCPT, HP 1741A 100MHz Scope + More

Sun Dec 1 21:18:00 2002

Hello Rod and Group,

I've been using a Radio Shack Model 22-504 to power my K2 at home....but
mine has the both the cig lighter plug and the output combination binding
post/bannana plugs on the front panel....  has a "push to re-set" circuit
breaker on the rear.

I don't have the internal battery in my K2 so I haven't needed to adjust the
output voltage. It's supposed to put out 13.8 volts.....my (2) cheap RS
DMM's both show 13.78 volts....close enough. For future reference, I'd like
to know how to adjust the output voltage. The owner's manual does not
include a schematic. Hopefully there is a trim pot somewhere inside?  Has
anyone taken the covers off to look?

Regards,

Rich  K2CPE
K2 #1102

----- Original Message -----
From: "Rod N0RC" <[email protected]>
To: <[email protected]>; "Low Power Amateur Radio Discussion"
<[email protected]>
Sent: Sunday, December 01, 2002 8:30 PM
Subject: Re: [Elecraft] FS: KTS1, Weller WTCPT, HP 1741A 100MHz Scope + More

> Folks,
>
> Anybody who is looking for a good supply to charge their K2 internal
> batt--this is a GOOD one. This is a very quiet linear supply, and can be
> adjusted to supply the K2 with the proper charging voltage. This unit
> also has a CIG. Plug on the front for other uses [as well as binding
> posts in back].
>
> Heck if nobody claims it I just might. ;-)
>
> ***Happy Holidays***
> 73, Rod N0RC
>
>
> ----- Original Message -----
> From: "Jerry McCollom" <[email protected]>
> To: "Low Power Amateur Radio Discussion" <[email protected]>;
> <[email protected]>
> Sent: Sunday, December 01, 2002 3:17 PM
> Subject: [Elecraft] FS: KTS1, Weller WTCPT, HP 1741A 100MHz Scope + More
>
>
>
> ...
> >
> >
> > *   Radio Shack 12V Regulated 3 AMP Power Supply
> >     RS Model 22-504.  Includes 12V Socket and 13.8VDC banana plugs.
> >     It has spent most of its life in the box :-)  You can buy this
> >     new at your local RS for $39.95 + sales tax.
> >
> >     Price: $35 shipped
> >
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>