[Elecraft] Re: K2/100 w/KAT100 - Something you may find

Sun Dec 1 19:07:00 2002

Tom or Wayne - I'm just winding up assembly of the KPA - not on the air yet.
Question - is applying dc to the K2 redundant if high-current supply to the
KPA is plugged in, or do you need both?  Page 49 suggests low-current supply
is optional. Still ok?

Thanks & 73   Terry KF4FD  K2 #2008

----- Original Message -----
From: "Wayne Burdick" <[email protected]>
To: "Tom Hammond N�SS" <[email protected]>
Cc: <[email protected]>
Sent: Sunday, December 01, 2002 12:28 PM
Subject: [Elecraft] Re: K2/100 w/KAT100 - Something you may find

>
>
> Tom Hammond N�SS wrote:
>
> > Moral of the story... follow Elecraft's suggestions for the proper order
of
> > powering up your rig once you have a bunch of options installed. That
> > being, power to the KAT100 first, then power to the KPA100 (if it's
gonna
> > be used) and THEN turn on the K2.
>
>
> Of course this is the most complicated possibility, Tom. If the operator
is
> using one power supply for all three, things are a lot simpler!
>
> 73,
> Wayne
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com