[Elecraft] small light weight paddles

[Jessie Oberreuter]

     Following someone else's advice about epoxying wire to the connector,
I wrapped some electrical tape around mine to make a temporary shell, and
filled it in with hot glue.  Works like a champ!

On Sat, 31 Aug 2002, Dave wrote:

> >Does anybody know who manufactures small light weight paddles.
> >Thanks and 73
> >
> >chip
> >kf4wbk
> 
> Chip
> 
> I have a Palm mini paddle and it's excellent. To fix one to your operating
> bench, use three pieces of "Blu Tac". It's worth making a spare lead as the
> cable/connector (3 pin print board plug/socket) is only held by
> solder/heatshrink to the cable. The paddles feel "soft" but are very nice to
> use. It gets used at home in preference to a Kent paddle.
> 
> Dave, G4AON
> K2 #1892 K1 #1154
> 
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>