[Elecraft] K2 spurious 'power' and 'speed' indications

Fri Aug 30 15:03:03 2002

I see this , too, every now and then. As a recovering software
engineer I just ignore it and call it a "feature".

Doug
W6JD
K2/100 #1626

----- Original Message -----
From: "Alan Fryer" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Friday, August 30, 2002 9:38 AM
Subject: Re: [Elecraft] K2 spurious 'power' and 'speed' indications

> I have noticed this on a least two K2s I have used......Not a big deal,
but
> perhaps Wayne or Eric could comment, probably has been covered before.
>
> I've got a good memory, but it's real short......
>
> Alan, N3BJ
> Bent Mountain, VA
>
> ----- Original Message -----
> From: "Ron D'Eau Claire" <[email protected]>
> To: <[email protected]>
> Sent: Friday, August 30, 2002 2:33 AM
> Subject: RE: [Elecraft] K2 spurious 'power' and 'speed' indications
>
>
> > Very intermittently while I am turning the main tuning knob (and not
> > catching the other knobs by mistake) the display momentarily changes
> > to display either the 'power' or 'speed' settings (as if I had moved
> > the relevant knobs).  It even did it once when I was not touching the
> > rig at all.
> > ...
> > Perhaps just a little annoyance, but has anybody else had this?
> >
> > 73s Dave G3YMC
> >
> >
> > That's something I have noticed on my K2 since it was built 2+ years
> > ago. It's been through two firmware upgrades and I did the "hardwire"
> > version of the frequency walking fix with no change in this behavior.
> >
> > I don't recall it doing it spontaneously, but it does happen in response
> > to turning the main tuning from time to time.
> >
> > As you said, it's a "little annoyance" and not something significant
> > enough for me to pursue.
> >
> > Ron AC7AC
> > K2 # 1289
> >
> >
> >
> > _______________________________________________
> > Elecraft mailing list: [email protected]
> > You must be a list member to post to the list.
> > Postings must be plain text (no HTML or attachments).
> > See: http://mailman.qth.net/mailman/listinfo/elecraft
> > Elecraft Web Page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com