[Elecraft] HI CUR

Fri Aug 30 10:26:05 2002

Hi

If you don't have the KPA100 and are seeing hi current. Try it with a dum=
my load. If the problem goes away then the problem is the antenna or feed=
 line. Most likely high SWR

If you have the KPA100 set the current limit to 3.5 amps per the manual.

If you have the QRP version. You may just have the may current set a litt=
le low. Try setting it to 3 amps and see if it helps.

You may have a problem in the transmitter if the above does not work.

Don Brown
KD5NDB

----- Original Message -----
From: kg4dni
Sent: Friday, August 30, 2002 9:07 AM
To: [email protected]
Subject: [Elecraft] HI CUR

Hi,

Why do I keep on seeing Hi Cur everytime I transmit?  I suspect two probl=
ems:

-Toooooo short mobile antenna
-Not enough current

Daniel
kg4dni

___________________________________________________________
TruthMail ...changing email forever!   http://www.truthmail.com

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. =20
Postings must be plain text (no HTML or attachments). =20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---