[Elecraft] Analyze this! Self-repairing K2

Thu Aug 29 21:29:01 2002

Hmmmmm,
Let us know when the QSL's start coming in from all points... "Christine"
may be up late working DX for you ;-)

Ron E
W�IFL

----- Original Message -----
Wrom: ALPTCXLYRWTQTIPWIGYOKSTTZ
To: <[email protected]>; "Eric Manning" <[email protected]>
Sent: Thursday, August 29, 2002 6:21 PM
Subject: Re: [Elecraft] Analyze this! Self-repairing K2

> I think you might want to rename your rig "Christine" :)
>    Kevin.
>
>
>
> 8/29/2002 5:17:44 PM, Eric Manning <[email protected]> wrote:
>
> >
> >Fellow K2ers
> >
> >I hacked the rev A control board as required for the Serial port
> >option and got no sidetone. After fixing a dumb wiring error I got a
> >VERY WEAK, almost inaudible sidetone even with sidetone level at max..
> >
> >However, over the next two weeks it got steadily stronger, day by
> >day. It is now much louder than necessary so I have dialed the level
> >way back. It seems to have repaired itself, gradually.
> >
> >I'm not making this up, honest.
> >
> >I wrote the first book on self-detection of faults by logic circuitry
> >many years ago, but this is the first time I have seen a
> >self-repairing digital system. I know the K2 is a great design, but
> >really , , ,
> >
> >Comments???
> >--
> >Eric Manning   VA7DZ VE3DPV
> >K2 #2561 "Pauline"
> >
> >--- StripMime Report -- processed MIME parts ---
> >multipart/alternative
> >  text/plain (text body -- kept)
> >  text/html
> >The reason this message is shown is because the post was in HTML
> >or had an attachment. Attachments are not allowed.
> >Please post in Plain-Text only.---
> >_______________________________________________
> >Elecraft mailing list: [email protected]
> >You must be a list member to post to the list.
> >Postings must be plain text (no HTML or attachments).
> >See: http://mailman.qth.net/mailman/listinfo/elecraft
> >Elecraft Web Page: http://www.elecraft.com
> >
>
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>