[Elecraft] NZ7C: K2/100 & LGD MP-11 questions

[Tim and Nancy Logan]

Phil, Chuck and others - I made a few QSO's (my first with the new amp)
tonite on the K2/100 and tuned around several bands. Regardless of
whether the LDG is on auto or not - the K2 will not initiate a tune. The
LDG does tune properly when I hit the manual tune button though. I'd
like to know from Wayne or Eric what we SHOULD expect - cause at the
moment I don't really know. Can't wait for the new Elecraft tuner.
Thanks again all. 73/Tim NZ7C

Phil Wheeler wrote:
> 
> Charles Bland wrote:
> 
> >The K2 doesn't have any knowledge about the LDG tuner, so I
> >would not expect the K2 to directly initiate a tune cycle on the LDG,
> >unless the LDG notices a hi SWR and does it on its own.
> >
> 
> If you set the LDG to non-auto, it should tune whenever it sees an
> adequate carrier.  20 W sure seems adequate!
> 
> 73, Phil