AW: [Elecraft] PlugIn Balun for K2/Kat1 ATU

[Peter Zenker]

Thanks for the help, George. Again I forgot, that we went from an NT
Server to a Linux server which is case sensitive. For future
announcements I will test any published link, before I send out the
mail.

Again, pse excuse.


73 de Peter,=A0 DL2FI
**********************************************************************
DV Berlin DARC e.V.
German QRP Group DL-QRP-AG http://www.dl-qrp-ag.de
QRPproject QRP and homebrew international http://www.qrpproject.de


> -----Urspr=FCngliche Nachricht-----
> Von: George, W5YR [mailto:w5yr@att.net]
> Gesendet: Mittwoch, 21. August 2002 16:59
> An: DL2FI@t-online.de
> Cc: Elecraft@mailman.qth.net
> Betreff: Re: [Elecraft] PlugIn Balun for K2/Kat1 ATU
>=20
> The correct URL appears to be
>=20
> 		http://www.werdau.net/qrpproject/k2_k1_balun.htm
>=20
> At least there is where I found the description
>=20
> 73/72/oo, George W5YR - the Yellow Rose of Texas
> Fairview, TX 30 mi NE of Dallas in Collin county EM13qe
> Amateur Radio W5YR, in the 56th year and it just keeps getting better!
> QRP-L 1373 NETXQRP 6 SOC 262 COG 8 FPQRP 404 TEN-X 11771 I-LINK 11735
> Icom IC-756PRO #02121  Kachina 505 DSP  #91900556  Icom IC-765 #02437
>=20
>=20
> Peter Zenker wrote:
> >
> > Inspired by the article in QRP Homebrewer  of W1CQ and after doing
some
> > experiments, we designed a PlugInBalun for the K2/K1 ATU. It is
housed
> > in a small 50mm x 30mm x 25mm box and fits direct on one of the BNC
> > jacks of the Tuner.
> > Its an 1:4 Balun, the VSVR between 1 MHz and 30 MHz is less the 1,1.
As
> > usually from QRPproject you can get either the description to make
it
> > complete on your own, or a kit. In the special case we added a ready
mad
> > PlugInBalun which is shipped including its individual chart measured
> > from 1 to 30 MHz.
> >
> > Pictures of the PlugInBalun can be found at
> > www.qrpproject.de/K2_K1_balun.htm (English) or
> > www.qrpproject.de/qrppbaluns.de (German)