[Elecraft] Power Supply for K2/100

Thu Aug 15 10:54:01 2002

Check a few back issues of QST.  There was an article on converting a
250-300W computer power supply to 13.8V @ 20A.  Some ferrite chokes may be
needed at the output to suppress the switching action from getting into the
receiver of the rig but no biggie.

I've built a few and they work great.

Cheers,
Robert
VE3RPF

----- Original Message -----
From: "Ulrich H. Steinberg" <[email protected]>
To: <[email protected]>
Sent: Thursday, August 15, 2002 8:55 AM
Subject: [Elecraft] Power Supply for K2/100

Has anyone found a switching power supply with 20A or more that fits well
into an EC2 cabinet?  Or even better:  one that is no higher than 1.5", is
very quiet on RF, fits in the EC2, and leaves enough room to squeeze in the
KAT100 with sufficient shielding?  If such a thing is not commercially
available are there any proven plans to build one yourself?

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com