[Elecraft] FAQ on Soldering & Flux (Kester web site)

Wed Aug 14 21:04:00 2002

Hey Eric! Perhaps this info should be on the builder's Resource 
page.

Chuck

Note G. Beat (W9GB)'s stunning brilliance and Chuck's apt reply 
(gack!)

From:           	"G. Beat (W9GB)" 
<[email protected]>
To:             	"Steve Dyer" <[email protected]>
Copies to:      	<[email protected]>
Subject:        	[Elecraft] FAQ on Soldering & Flux (Kester 
web site)
Date sent:      	Wed, 14 Aug 2002 19:12:55 -0500

> Steve -
> 
> I would recommend looking at the Kester web site (they are 10 miles north of
> my QTH, Des Plaines, IL)  Kester is now part of Northrop Grumman.
> 
> FAQ about Hand Soldering
> http://www.kester.com/faq_hand_soldering.html
> 
> FAQ about Flux
> http://www.kester.com/faq_flux.html
> 
> FAQ about Solder Alloys
> http://www.kester.com/faq_solder_alloys.html
> 
> Kester Solder Alloy temperatures (great chart for the workbench)
> http://www.kester.com/alloy_temp_chart.html
> 
> Reflow temperature profile of 63/37
> http://www.kester.com/reflow_profile.html
> 
> 
> 
> ----- Original Message -----
> From: "Steve Dyer" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, August 14, 2002 4:58 PM
> Subject: [Elecraft] Deflux?
> 
> 
> > Any recommendations on defluxing juice and where to get it?
> >
> > Want to pretty up my board.
> >
> > 73,
> >
> > Steve
> > W1SRD
> >
> > _______________________________________________
> > Elecraft mailing list: [email protected]
> > You must be a list member to post to the list.
> > Postings must be plain text (no HTML or attachments).
> > See: http://mailman.qth.net/mailman/listinfo/elecraft
> > Elecraft Web Page: http://www.elecraft.com
> >
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com