[Elecraft] Deflux?

Ron D'Eau Claire [email protected]
Wed Aug 14 19:57:00 2002


All the recommendations I have seen from Elecraft can be summed up in
three words:  Don't do it! 

The K2 assembly manual says, in bold face type, "Do not use... solvents
of any kind." 

I have found that to be the requirement, if not the recommendation, of
many manufacturers when doing field repairs of PCB's. Some
manufacturer's will condemn at customer's expense any boards that have
been repaired and cleaned. 

Some folks here wrote about using isopropyl alcohol, but that's still a
solvent where I come from... 

Ron AC7AC
K2 # 1289



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Steve Dyer
Sent: Wednesday, August 14, 2002 2:59 PM
To: [email protected]
Subject: [Elecraft] Deflux?


Any recommendations on defluxing juice and where to get it?

Want to pretty up my board.

73,

Steve
W1SRD

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. 
Postings must be plain text (no HTML or attachments). 
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com