[Elecraft] KPA 100

[Hank Kohl K8DD]

At 8/5/02 09:19 PM -0500, Tom Hammond N�SS wrote:
>Peter:
>
>>I have in mind to build the KPA 100.
>>I like QRP operation to the field using the K2 ATU and  radom length wires.
>>So would  like to know if it is possible to interchange the standard cover
>>with the KPA 100 cover easily, only by removing screws and plug and unplug
>>connecters.
>
>6 screws

I would not use the two side screws in the KPA100 because of the chance 
that they may get stripped.


>4 wires to unplug and re-plug:
>   AUX ANT
>   AUX DC

And don't mix these two AUX plugs up!!!!

>   SPKR
>   AUX BUX connector
>
>Easy? Yes! Usually less than 2 minutes to change.

That's the Missouri time .... Michigan time 1 min 42 seconds

73    Hank   K8DD


>73,
>
>Tom Hammond   N0SS
>
>
>
>
>
>_______________________________________________
>Elecraft mailing list: Elecraft@mailman.qth.net
>You must be a list member to post to the list. Postings must be plain text 
>(no HTML or attachments). See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com

*/     Hank Kohl  K8DD      k8dd@arrl.net
*/     ARRL TS              http://www.qsl.net/k8dd
*/     MI-QRP - Vice Pres.  QRP-ARCI - Director
*/
If God intended you to be on single sideband, he would have given you only 
one nostril.
- Steve, K2PTS



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---