[Elecraft] Noise Generator

[Don Wilhelm]

Tom,
Evaluate the effectiveness of the 2nd XFil SSB Mod only with the OP1 filter
and in SSB mode.  The transistor switch is only active with that
combination.
You can tune L34 a bit to achieve a bit  of extra balance between LSB and
USB if you do not stray too far from the setting done by listening for the
best S/N ratio in CW mode with a narrow filter.

73,
Don W3FPR

----- Original Message -----
> Also, although I did do the 2nd XFil SSB Tuning Mod, the filter response
on
> the bands that work still roll off at the high end.
>
>