[Elecraft] Auto tuners compared?

Charles Mabbott [email protected]
Thu Apr 4 16:03:01 2002


Here is a spread sheet I put together for two SGC and 2 LDG tuners

   http://peleus.dhs.org:81/aa8vs/antennastudy.xls

Not related or business oriented and comments are just what I dug
out from on line documentation.
73 oo
=======================
Chuck Mabbott
AA8VS
42  19'  52" N  83  28'  32" W
Grid Square  EN82gh
Home Page: http://aa8vs.dhs.org:81/aa8vs
FP-113 MI-QRP#1212 Firebirds #2117 SOC #445

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Vic Rosenthal
Sent: Monday, April 01, 2002 4:11 PM
To: [email protected]
Cc: [email protected]
Subject: Re: [Elecraft] Auto tuners compared?


[email protected] wrote:
>
> I'd like to hear everyone's views on the various remote
> autocouplers/autotuners commercially available for use with my
K2 when
> th KPA100 becomes available.

I had an SGC 230.  It was quite good at matching almost any
antenna I tried
including whips, long wires, and loops from 1.8-30 MHz.  It failed
to match a
1/2 wave wire on its exact resonant frequency, but changing the
length of the
wire a few feet fixed this.  It is in a waterproof box and so can
be mounted at
the feedpoint.  It's very well-built and relatively expensive, but
it is
available discounted (and of course second-hand) at more
reasonable prices.  I
haven't compared it to the LDG remote model, but I believe it has
a wider range
of impedances that it will match.  I would buy one again if I
needed this
functionality.

73,
Vic, K2VCO
Fresno CA
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com