[EIDXA] K3-P3-N1MM-SteppIR

[reheinri at rockwellcollins.com]

David,

My sense is this is not a wiring issue - but more of a computer 
configuration issue.  The good news is that N1MM is configurable for just 
about anything you may want.  The bad news is that N1MM is configurable 
for just about anything you may want!!!

I would highly suggest that you go to the N1MM reflectors and either 
search for an answer to your questions - or post your question to the 
reflector.  My bet is that 1000 others have already done what you want to 
do and can take you there step by step.

Otherwise you will be swimming in the .ini file pool.

Good luck,
Rick





From:   David Christ <radioham at mchsi.com>
To:     EIDXA at mailman.qth.net
Date:   03/11/2014 12:08 PM
Subject:        [EIDXA] K3-P3-N1MM-SteppIR
Sent by:        eidxa-bounces at mailman.qth.net



Has anyone successfully combined a P3, a K3, SteppIR and N1MM?  If so how 
did you wire it up (which pins connect and which not)?  The computer has a 
true serial port.

The SteppIR worked fine with the K3 and P3 alone.  Once we added the 
Computer and N1MM the SteppIR no longer follows the K3 and only changes 
when a call sign is entered in the logging window.

And how about adding MMTTY to the mix?

David  K0LUM
______________________________________________________________
EIDXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/eidxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:EIDXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html