[EIDXA] Noise tetecor/receiver

[steve white]

Rich	

When I had this kind of problem several years ago I used my IC706 which has
a 2M ssb/cw/am modes and all I did was build up a little beam and found the
problem pretty quickly.  It also has 220 Mhz as well.   I called the power
company, they came out and changed out a few parts on the pole and all was
well.  W0SR helped me make sure that I was pointed at the right pole.  If it
will help you, I would be glad to lend it to you.  It's little, it runs on
12 volts and I still have the antenna I think.

Steve  NU0P

-----Original Message-----
From: eidxa-bounces at mailman.qth.net [mailto:eidxa-bounces at mailman.qth.net]
On Behalf Of Richard Haendel
Sent: Monday, October 11, 2010 05:07
To: EIDXA
Subject: [EIDXA] Noise tetecor/receiver

Hi all, 
Does anyone have a hand held noise detector that I can borrow?  I have an S9
+10 dB noise level at two antenna headings at my shop QTH. I need to find
these soon ! My HT has too good an AGC and I can't locate the noise the
sources with it.   One heading is at 135 degrees,  the other is at 240 !!.
Drats !!

Any suggestions or help would be appreciated. 

Rich W3ACO

______________________________________________________________
EIDXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/eidxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:EIDXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html