[EICO] EICO147A signal tracer, what is Probe?

[Malcolm & Carol Leonard]

Coax used was RG58/AU.The only source for it in quantites less than a 50 
foot roll that I personally know of  is Hosfelt where it is sold for 14 
cents a foot.
Malcolm
----- Original Message ----- 
From: "D. Robbins" <grobbins at netflash.net>
To: "Malcolm & Carol Leonard" <ricup at mindspring.com>
Sent: Friday, December 10, 2004 3:08 AM
Subject: Re: [EICO] EICO147A signal tracer, what is Probe?


>
> Thanks Malcolm,  forgot it was in the manual from bama, the schematic 
> shows  an 1N34 diode at the tip in series with a 470K resistor  connected 
> to the coax center,don't know what the coax thououg.  I just wondered if 
> it had number like their PLC PD PSD PRF-11 etc. some thing to look for on 
> Ebay.......perhaps I'll just make one.
> Dave
>
> At 04:58 PM 12/09/04, you wrote:
>>I don't know if they were ever offered separately as stand-alone kits, but 
>>I think probably not.
>>I can send a scan of the interior of the demodulator probe along with 
>>list of the parts in it,if that will help.
>>
>>Or,I believe it is on Bama in the 147A owner's manual.
>>Let me know if you need more help on this.
>>
>>The hollow ,aluminum body of the demodulator probe is identical to the 
>>body used on all Eico scope probes.
>>Malcolm Leonard
>>
>>----- Original Message ----- From: "D. Robbins" <grobbins at netflash.net>
>>To: <eico at mailman.qth.net>
>>Sent: Thursday, December 09, 2004 4:56 AM
>>Subject: [EICO] EICO147A signal tracer, what is Probe?
>>
>>
>>>Greetings, does anyone know what the probes are for the 147A tracer. The 
>>>RF probe appears to be in one of EICO's standard probe housing, does it 
>>>have a number?
>>>Dave
>>>
>>>
>>>_______________________________________________
>>>EICO mailing list
>>>EICO at mailman.qth.net
>>>http://mailman.qth.net/mailman/listinfo/eico
>>
>>
>
>
>