From kp4p at hotmail.com Tue Apr 19 12:11:35 2022 From: kp4p at hotmail.com (Telesforo Figueroa) Date: Tue, 19 Apr 2022 16:11:35 +0000 Subject: [Dxbase] Lost QSOs after downloading an ADIF file Message-ID: Hello: I have downloaded a complete log from my DXBase2007 as an ADIF file, but the resulted amount is about 400 QSO,s less. What is wrong or what did I did wrong? Tele KP4P From wa6axe at hotmail.com Tue Apr 19 13:18:17 2022 From: wa6axe at hotmail.com (Joe WA6AXE) Date: Tue, 19 Apr 2022 17:18:17 +0000 Subject: [Dxbase] Lost QSOs after downloading an ADIF file In-Reply-To: References: Message-ID: Tele, TWO things are possible here ... 1. Check the OPR CALL for each of the 400 QSOs you say are missing.. If the 2. OPR CALL is NOT registered in your DXbase2007 REG File - then they WILL NOT 3. be exported.. You will need a NEW Reg File.. 2. MAKE SURE in the Selection Wizard (ADI EXPORT) that there is NOT repeat NOT any CHECKMARKS anywhere on the main window and also the QSO Filters window. This way - you will be able to export ALL of the QSOs. 73 Joe wa6axe 1. ________________________________ From: dxbase-bounces at mailman.qth.net on behalf of Telesforo Figueroa Sent: Tuesday, April 19, 2022 11:11 AM To: dxbase at mailman.qth.net Subject: [Dxbase] Lost QSOs after downloading an ADIF file Hello: I have downloaded a complete log from my DXBase2007 as an ADIF file, but the resulted amount is about 400 QSO,s less. What is wrong or what did I did wrong? Tele KP4P ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html