From crownhaven at bellsouth.net Wed Nov 13 11:05:31 2019 From: crownhaven at bellsouth.net (Crownhaven) Date: Wed, 13 Nov 2019 10:05:31 -0600 Subject: [Dxbase] LOTW Upload Issue References: Message-ID: Sending to both groups.? Not sure if we have moved to IO or not. In any event, did an upload to LOTW.? Used regular procedure, signed with certificate and sent it on its way.? Three QSOS were rejected.? Here is basically what LOTW told me. 10/20/19??? ??? Line 36 5K0K??? ??? ??? ??? 0202 21.265 80M CW When I checked my log, all the info is correct.? Where did the 21.265 come from? Same thing basically happened with two other Q's.? One on 40 meters but freq kicked back as 28.891 Another on 17 meters, kicked back as 28085.? All CW. Any thoughts? Steve, N4JQQ From wd8pkf at awcmail.com Wed Nov 13 17:11:44 2019 From: wd8pkf at awcmail.com (Alan Scher) Date: Wed, 13 Nov 2019 16:11:44 -0600 Subject: [Dxbase] Loss of my Internet Packet window Message-ID: <20191113141145.3E38C401@m0116290.ppops.net> Hello All, ??????????? Have a cluster window Problem. All was working well until a few minutes ago, when I lost the connection to the cluster and had several keep alive messages in a row. I then closed the internet cluster window. When I went to open a new internet cluster window I found it was grayed out. I closed the program and reopened DxBase. Now the open a new internet cluster window was not grayed out, but when I selected to open the new window nothing happened.? I had the same problem abt a year ago and I ended up doing a complete reinstall. Is there anything that can short of a reinstall of the program? Thank you Alan WD8PKF Sent from Mail for Windows 10 From wa6axe at verizon.net Fri Nov 15 10:49:42 2019 From: wa6axe at verizon.net (Joseph Glockner) Date: Fri, 15 Nov 2019 15:49:42 +0000 (UTC) Subject: [Dxbase] Heads-up on Operations using the callsign TO9W (Ambiguous Prefix) References: <1088019899.1475151.1573832982159.ref@mail.yahoo.com> Message-ID: <1088019899.1475151.1573832982159@mail.yahoo.com> Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ... ? // TO9W //? ? Just saw that the callsign TO9W will be used from? Saint Martin (NA-105) ? on? 4-13 December 2019. This callsign will default to France(F) because of the Alias Map table mapping.? ? This callsign is not currently MAPPED in the CALLMAP table -- so, if you want,? simply make a dummy QSO with this callsign and change the PREFIX column? of your logbook mdb file to FS and then when the pop-up asks you if you want? to save this TO9W mapped to FS -- say YES/OK ---- Then delete that dummy QSO ..? ? The CALLMAP table will now be updated in advance so that if you work this? station -- it will have the correct PREFIX in your logbook QSO window ...? ? 73 Joe WA6AXE From n4tl2 at yahoo.com Fri Nov 15 11:00:28 2019 From: n4tl2 at yahoo.com (Tom Lewis) Date: Fri, 15 Nov 2019 16:00:28 +0000 (UTC) Subject: [Dxbase] 630 Meters In-Reply-To: <1088019899.1475151.1573832982159@mail.yahoo.com> References: <1088019899.1475151.1573832982159.ref@mail.yahoo.com> <1088019899.1475151.1573832982159@mail.yahoo.com> Message-ID: <833472668.505889.1573833628636@mail.yahoo.com> Hi Everyone I found that my ICOM IC-7600 will receive on 630 meters, which is 474 KHz. I was listening to the digital mode JT9 and heard a number of stations. A friend of mine is building an antenna for that band and it looks interesting to me.? I wondered if DXBase would log the contacts correctly. In the log, I put in N1TEST and tabbed to the next column. The frequency was populated okay, but the band has 75G. ? How can I add 630 meters to the band list? I generated an ADIF file and the band data is wrong.0.47420?4MM? 73 Tom N4TL? From wa6axe at hotmail.com Fri Nov 15 11:18:13 2019 From: wa6axe at hotmail.com (Joe WA6AXE) Date: Fri, 15 Nov 2019 16:18:13 +0000 Subject: [Dxbase] 630 Meters In-Reply-To: <833472668.505889.1573833628636@mail.yahoo.com> References: <1088019899.1475151.1573832982159.ref@mail.yahoo.com> <1088019899.1475151.1573832982159@mail.yahoo.com>, <833472668.505889.1573833628636@mail.yahoo.com> Message-ID: GM Tom, No -- DXbase2007 was never updated to handle those frequencies/bands .. Since DXbase2007 is totally dead - there is no way to update DXbase2007 to handle those freqs/bands .. The only way to handle an ADIF file upload to LOTW ,etc -- would be to manually update the adif file for all of the QSOs for those freqs/bands. The addition of those freqs/bands is a HARDCODED change. With DXbase2007 dead -- this will never happen - regretfully. 73 Joe wa6axe ________________________________ From: dxbase-bounces at mailman.qth.net on behalf of Tom Lewis via Dxbase Sent: Friday, November 15, 2019 10:00 AM To: dxbase at mailman.qth.net Subject: [Dxbase] 630 Meters Hi Everyone I found that my ICOM IC-7600 will receive on 630 meters, which is 474 KHz. I was listening to the digital mode JT9 and heard a number of stations. A friend of mine is building an antenna for that band and it looks interesting to me. I wondered if DXBase would log the contacts correctly. In the log, I put in N1TEST and tabbed to the next column. The frequency was populated okay, but the band has 75G. How can I add 630 meters to the band list? I generated an ADIF file and the band data is wrong.0.47420 4MM 73 Tom N4TL ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From wa6axe at verizon.net Fri Nov 15 11:19:51 2019 From: wa6axe at verizon.net (Joseph Glockner) Date: Fri, 15 Nov 2019 16:19:51 +0000 (UTC) Subject: [Dxbase] 630 Meters In-Reply-To: <833472668.505889.1573833628636@mail.yahoo.com> References: <1088019899.1475151.1573832982159.ref@mail.yahoo.com> <1088019899.1475151.1573832982159@mail.yahoo.com> <833472668.505889.1573833628636@mail.yahoo.com> Message-ID: <1092021145.1458652.1573834791338@mail.yahoo.com> GM Tom, No -- DXbase2007 was never updated to handle those frequencies/bands .. Since DXbase2007 is totally dead - there is no way to update DXbase2007to handle those freqs/bands .. The only way to handle an ADIF file uploadto LOTW ,etc -- would be to manually update the adif file for all of the QSOsfor those freqs/bands. The addition of those freqs/bands is a HARDCODED change. With DXbase2007dead -- this will never happen - regretfully. 73 Joe wa6axe -----Original Message----- From: Tom Lewis via Dxbase To: dxbase Sent: Fri, Nov 15, 2019 10:00 am Subject: [Dxbase] 630 Meters Hi Everyone I found that my ICOM IC-7600 will receive on 630 meters, which is 474 KHz. I was listening to the digital mode JT9 and heard a number of stations. A friend of mine is building an antenna for that band and it looks interesting to me.? I wondered if DXBase would log the contacts correctly. In the log, I put in N1TEST and tabbed to the next column. The frequency was populated okay, but the band has 75G. ? How can I add 630 meters to the band list? I generated an ADIF file and the band data is wrong.0.47420?4MM? 73 Tom N4TL? ? ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From n4tl2 at yahoo.com Fri Nov 15 11:51:28 2019 From: n4tl2 at yahoo.com (Tom Lewis) Date: Fri, 15 Nov 2019 16:51:28 +0000 (UTC) Subject: [Dxbase] 630 Meters In-Reply-To: <1092021145.1458652.1573834791338@mail.yahoo.com> References: <1088019899.1475151.1573832982159.ref@mail.yahoo.com> <1088019899.1475151.1573832982159@mail.yahoo.com> <833472668.505889.1573833628636@mail.yahoo.com> <1092021145.1458652.1573834791338@mail.yahoo.com> Message-ID: <420856044.530761.1573836688835@mail.yahoo.com> Joe, Thanks for the answer. I would love to get a copy of the source code. I would ask N4PY to update it for us. He comes to the local PVRC meetings. http://www.n4py.com/ Tom On Friday, November 15, 2019, 11:23:18 AM EST, Joseph Glockner via Dxbase wrote: GM Tom, No -- DXbase2007 was never updated to handle those frequencies/bands .. Since DXbase2007 is totally dead - there is no way to update DXbase2007to handle those freqs/bands .. The only way to handle an ADIF file uploadto LOTW ,etc -- would be to manually update the adif file for all of the QSOsfor those freqs/bands. The addition of those freqs/bands is a HARDCODED change. With DXbase2007dead -- this will never happen - regretfully. 73 Joe wa6axe -----Original Message----- From: Tom Lewis via Dxbase To: dxbase Sent: Fri, Nov 15, 2019 10:00 am Subject: [Dxbase] 630 Meters Hi Everyone I found that my ICOM IC-7600 will receive on 630 meters, which is 474 KHz. I was listening to the digital mode JT9 and heard a number of stations. A friend of mine is building an antenna for that band and it looks interesting to me.? I wondered if DXBase would log the contacts correctly. In the log, I put in N1TEST and tabbed to the next column. The frequency was populated okay, but the band has 75G. ? How can I add 630 meters to the band list? I generated an ADIF file and the band data is wrong.0.47420?4MM? 73 Tom N4TL? ? ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From crownhaven at bellsouth.net Fri Nov 15 12:13:04 2019 From: crownhaven at bellsouth.net (Crownhaven) Date: Fri, 15 Nov 2019 11:13:04 -0600 Subject: [Dxbase] 630 Meters In-Reply-To: <420856044.530761.1573836688835@mail.yahoo.com> References: <1088019899.1475151.1573832982159.ref@mail.yahoo.com> <1088019899.1475151.1573832982159@mail.yahoo.com> <833472668.505889.1573833628636@mail.yahoo.com> <1092021145.1458652.1573834791338@mail.yahoo.com> <420856044.530761.1573836688835@mail.yahoo.com> Message-ID: <9C9F8995-9A9F-44D7-B392-55520D941A70@bellsouth.net> Not speaking for Joe or Neil but I?m guessing he would expect payment. I?d certainly be willing to donate! Steve, N4JQQ > On Nov 15, 2019, at 10:51 AM, Tom Lewis via Dxbase wrote: > > Joe, > Thanks for the answer. I would love to get a copy of the source code. I would ask N4PY to update it for us. He comes to the local PVRC meetings. > http://www.n4py.com/ > > Tom > On Friday, November 15, 2019, 11:23:18 AM EST, Joseph Glockner via Dxbase wrote: > > GM Tom, > No -- DXbase2007 was never updated to handle those frequencies/bands .. > Since DXbase2007 is totally dead - there is no way to update DXbase2007to handle those freqs/bands .. The only way to handle an ADIF file uploadto LOTW ,etc -- would be to manually update the adif file for all of the QSOsfor those freqs/bands. > The addition of those freqs/bands is a HARDCODED change. With DXbase2007dead -- this will never happen - regretfully. > 73 Joe wa6axe > > -----Original Message----- > From: Tom Lewis via Dxbase > To: dxbase > Sent: Fri, Nov 15, 2019 10:00 am > Subject: [Dxbase] 630 Meters > > Hi Everyone > I found that my ICOM IC-7600 will receive on 630 meters, which is 474 KHz. > I was listening to the digital mode JT9 and heard a number of stations. > A friend of mine is building an antenna for that band and it looks interesting to me. > I wondered if DXBase would log the contacts correctly. > In the log, I put in N1TEST and tabbed to the next column. The frequency was populated okay, but the band has 75G. How can I add 630 meters to the band list? > I generated an ADIF file and the band data is wrong.0.47420 4MM > 73 Tom N4TL > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From crownhaven at bellsouth.net Fri Nov 15 12:13:04 2019 From: crownhaven at bellsouth.net (Crownhaven) Date: Fri, 15 Nov 2019 11:13:04 -0600 Subject: [Dxbase] 630 Meters In-Reply-To: <420856044.530761.1573836688835@mail.yahoo.com> References: <1088019899.1475151.1573832982159.ref@mail.yahoo.com> <1088019899.1475151.1573832982159@mail.yahoo.com> <833472668.505889.1573833628636@mail.yahoo.com> <1092021145.1458652.1573834791338@mail.yahoo.com> <420856044.530761.1573836688835@mail.yahoo.com> Message-ID: <9C9F8995-9A9F-44D7-B392-55520D941A70@bellsouth.net> Not speaking for Joe or Neil but I?m guessing he would expect payment. I?d certainly be willing to donate! Steve, N4JQQ > On Nov 15, 2019, at 10:51 AM, Tom Lewis via Dxbase wrote: > > Joe, > Thanks for the answer. I would love to get a copy of the source code. I would ask N4PY to update it for us. He comes to the local PVRC meetings. > http://www.n4py.com/ > > Tom > On Friday, November 15, 2019, 11:23:18 AM EST, Joseph Glockner via Dxbase wrote: > > GM Tom, > No -- DXbase2007 was never updated to handle those frequencies/bands .. > Since DXbase2007 is totally dead - there is no way to update DXbase2007to handle those freqs/bands .. The only way to handle an ADIF file uploadto LOTW ,etc -- would be to manually update the adif file for all of the QSOsfor those freqs/bands. > The addition of those freqs/bands is a HARDCODED change. With DXbase2007dead -- this will never happen - regretfully. > 73 Joe wa6axe > > -----Original Message----- > From: Tom Lewis via Dxbase > To: dxbase > Sent: Fri, Nov 15, 2019 10:00 am > Subject: [Dxbase] 630 Meters > > Hi Everyone > I found that my ICOM IC-7600 will receive on 630 meters, which is 474 KHz. > I was listening to the digital mode JT9 and heard a number of stations. > A friend of mine is building an antenna for that band and it looks interesting to me. > I wondered if DXBase would log the contacts correctly. > In the log, I put in N1TEST and tabbed to the next column. The frequency was populated okay, but the band has 75G. How can I add 630 meters to the band list? > I generated an ADIF file and the band data is wrong.0.47420 4MM > 73 Tom N4TL > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From n4tl2 at yahoo.com Tue Nov 26 14:44:54 2019 From: n4tl2 at yahoo.com (Tom Lewis) Date: Tue, 26 Nov 2019 19:44:54 +0000 (UTC) Subject: [Dxbase] selection wizard In-Reply-To: <420856044.530761.1573836688835@mail.yahoo.com> References: <1088019899.1475151.1573832982159.ref@mail.yahoo.com> <1088019899.1475151.1573832982159@mail.yahoo.com> <833472668.505889.1573833628636@mail.yahoo.com> <1092021145.1458652.1573834791338@mail.yahoo.com> <420856044.530761.1573836688835@mail.yahoo.com> Message-ID: <1542230965.3706044.1574797494548@mail.yahoo.com> Hi Everyone, I have used the Selection Wizard many times with no problems. Now, in the QSO Filters section, if I set a band to any value other then 2, I get an error.? I put in 30 and click okay and a error box opens up. The error is "An invalid filter condition was detected".? Does anyone know how to fix this? ThanksTom N4TL From crownhaven at bellsouth.net Wed Nov 27 18:53:24 2019 From: crownhaven at bellsouth.net (Crownhaven) Date: Wed, 27 Nov 2019 18:53:24 -0500 Subject: [Dxbase] Bridging WSJT/X References: <3B50F155-586C-4D91-8A4A-389579A039F8.ref@bellsouth.net> Message-ID: <3B50F155-586C-4D91-8A4A-389579A039F8@bellsouth.net> I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB. Does such an animal exist for WSJT/X? Thanks Steve, N4JQQ From ks4v at comcast.net Wed Nov 27 23:01:06 2019 From: ks4v at comcast.net (ks4v at comcast.net) Date: Wed, 27 Nov 2019 22:01:06 -0600 Subject: [Dxbase] Bridging WSJT/X In-Reply-To: <3B50F155-586C-4D91-8A4A-389579A039F8@bellsouth.net> Message-ID: Yes, I use it every day.BruceKS4V -------- Original message --------From: Crownhaven Date: 11/27/19 5:53 PM (GMT-06:00) To: dxbase at mailman.qth.net, dxbase at yahoogroups.com, wa6axe at verizon.net Subject: [Dxbase] Bridging WSJT/X I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB.? Does such an animal exist for WSJT/X?ThanksSteve, N4JQQ______________________________________________________________Dxbase mailing listHome: http://mailman.qth.net/mailman/listinfo/dxbaseHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Dxbase at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html From crownhaven at bellsouth.net Wed Nov 27 23:32:11 2019 From: crownhaven at bellsouth.net (Crownhaven) Date: Wed, 27 Nov 2019 23:32:11 -0500 Subject: [Dxbase] Bridging WSJT/X In-Reply-To: <201911280400.xAS3vM2a127046@flpd572.prodigy.net> References: <201911280400.xAS3vM2a127046@flpd572.prodigy.net> Message-ID: <62950347-F4E8-4201-99DB-DFFB42916429@bellsouth.net> Thanks Bruce, Joe! > On Nov 27, 2019, at 11:01 PM, "ks4v at comcast.net" wrote: > > Yes, I use it every day. > Bruce > KS4V > > -------- Original message -------- > From: Crownhaven > Date: 11/27/19 5:53 PM (GMT-06:00) > To: dxbase at mailman.qth.net, dxbase at yahoogroups.com, wa6axe at verizon.net > Subject: [Dxbase] Bridging WSJT/X > > I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB. Does such an animal exist for WSJT/X? > > Thanks > > Steve, N4JQQ > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From crownhaven at bellsouth.net Wed Nov 27 23:32:11 2019 From: crownhaven at bellsouth.net (Crownhaven) Date: Wed, 27 Nov 2019 23:32:11 -0500 Subject: [Dxbase] Bridging WSJT/X In-Reply-To: <201911280400.xAS3vM2a127046@flpd572.prodigy.net> References: <201911280400.xAS3vM2a127046@flpd572.prodigy.net> Message-ID: <62950347-F4E8-4201-99DB-DFFB42916429@bellsouth.net> Thanks Bruce, Joe! > On Nov 27, 2019, at 11:01 PM, "ks4v at comcast.net" wrote: > > Yes, I use it every day. > Bruce > KS4V > > -------- Original message -------- > From: Crownhaven > Date: 11/27/19 5:53 PM (GMT-06:00) > To: dxbase at mailman.qth.net, dxbase at yahoogroups.com, wa6axe at verizon.net > Subject: [Dxbase] Bridging WSJT/X > > I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB. Does such an animal exist for WSJT/X? > > Thanks > > Steve, N4JQQ > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From crownhaven at bellsouth.net Thu Nov 28 19:44:09 2019 From: crownhaven at bellsouth.net (Crownhaven) Date: Thu, 28 Nov 2019 19:44:09 -0500 Subject: [Dxbase] Running DXB From Second Location References: <23D2471F-D5EF-49E4-BA94-734FA3DFC8CC.ref@bellsouth.net> Message-ID: <23D2471F-D5EF-49E4-BA94-734FA3DFC8CC@bellsouth.net> Guys, another question. I have several but one at a time. What is procedure if you are running DXB from second QTH, second home. Run second copy of program? Or would files become crossed up? Thanks, Steve, N4JQQ > On Nov 27, 2019, at 11:32 PM, Crownhaven wrote: > > Thanks Bruce, Joe! > >> On Nov 27, 2019, at 11:01 PM, "ks4v at comcast.net" wrote: >> >> Yes, I use it every day. >> Bruce >> KS4V >> >> -------- Original message -------- >> From: Crownhaven >> Date: 11/27/19 5:53 PM (GMT-06:00) >> To: dxbase at mailman.qth.net, dxbase at yahoogroups.com, wa6axe at verizon.net >> Subject: [Dxbase] Bridging WSJT/X >> >> I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB. Does such an animal exist for WSJT/X? >> >> Thanks >> >> Steve, N4JQQ >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From crownhaven at bellsouth.net Thu Nov 28 19:44:09 2019 From: crownhaven at bellsouth.net (Crownhaven) Date: Thu, 28 Nov 2019 19:44:09 -0500 Subject: [Dxbase] Running DXB From Second Location References: <23D2471F-D5EF-49E4-BA94-734FA3DFC8CC.ref@bellsouth.net> Message-ID: <23D2471F-D5EF-49E4-BA94-734FA3DFC8CC@bellsouth.net> Guys, another question. I have several but one at a time. What is procedure if you are running DXB from second QTH, second home. Run second copy of program? Or would files become crossed up? Thanks, Steve, N4JQQ > On Nov 27, 2019, at 11:32 PM, Crownhaven wrote: > > Thanks Bruce, Joe! > >> On Nov 27, 2019, at 11:01 PM, "ks4v at comcast.net" wrote: >> >> Yes, I use it every day. >> Bruce >> KS4V >> >> -------- Original message -------- >> From: Crownhaven >> Date: 11/27/19 5:53 PM (GMT-06:00) >> To: dxbase at mailman.qth.net, dxbase at yahoogroups.com, wa6axe at verizon.net >> Subject: [Dxbase] Bridging WSJT/X >> >> I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB. Does such an animal exist for WSJT/X? >> >> Thanks >> >> Steve, N4JQQ >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html From fred at g4bwp.com Fri Nov 29 03:21:03 2019 From: fred at g4bwp.com (Fred Handscombe) Date: Fri, 29 Nov 2019 08:21:03 +0000 Subject: [Dxbase] Running DXB From Second Location In-Reply-To: <23D2471F-D5EF-49E4-BA94-734FA3DFC8CC@bellsouth.net> References: <23D2471F-D5EF-49E4-BA94-734FA3DFC8CC.ref@bellsouth.net> <23D2471F-D5EF-49E4-BA94-734FA3DFC8CC@bellsouth.net> Message-ID: Hi Steve I faced this problem whilst living overseas After a few "forgotten memory stick" problems I was told about DropBox and have been using it ever since You can point DXbase to the DropBox location so it always opens the latest log You also get multiple version back ups in Dropbox although I still make local backups periodically on a USB HDD Since then other similar services heve come along like Google drive and OneDrive but I have not changed from DropBox 73 Fred G4BWP www.g4bwp.com Hoarder of fine valved radios ------ Original Message ------ From: "Crownhaven" To: "ks4v at comcast.net" Cc: dxbase at yahoogroups.com; dxbase at mailman.qth.net Sent: 29/11/2019 00:44:09 Subject: [Dxbase] Running DXB From Second Location >Guys, another question. I have several but one at a time. > >What is procedure if you are running DXB from second QTH, second home. Run second copy of program? Or would files become crossed up? > >Thanks, > >Steve, N4JQQ > >> On Nov 27, 2019, at 11:32 PM, Crownhaven wrote: >> >> Thanks Bruce, Joe! >> >>> On Nov 27, 2019, at 11:01 PM, "ks4v at comcast.net" wrote: >>> >>> Yes, I use it every day. >>> Bruce >>> KS4V >>> >>> -------- Original message -------- >>> From: Crownhaven >>> Date: 11/27/19 5:53 PM (GMT-06:00) >>> To: dxbase at mailman.qth.net, dxbase at yahoogroups.com, wa6axe at verizon.net >>> Subject: [Dxbase] Bridging WSJT/X >>> >>> I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB. Does such an animal exist for WSJT/X? >>> >>> Thanks >>> >>> Steve, N4JQQ >>> ______________________________________________________________ >>> Dxbase mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Dxbase at mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dxbase at mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > >______________________________________________________________ >Dxbase mailing list >Home: http://mailman.qth.net/mailman/listinfo/dxbase >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Dxbase at mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html From gyates at dreamscape.com Fri Nov 29 14:14:35 2019 From: gyates at dreamscape.com (gyates at dreamscape.com) Date: Fri, 29 Nov 2019 14:14:35 -0500 Subject: [Dxbase] Bridging WSJT/X In-Reply-To: <20191128040650.35A94149B2DC@mail.qsl.net> References: <3B50F155-586C-4D91-8A4A-389579A039F8@bellsouth.net> <20191128040650.35A94149B2DC@mail.qsl.net> Message-ID: <000a01d5a6e9$3e0ba900$ba22fb00$@dreamscape.com> Bruce, What program are you using? I just got into FT8 recently and using N3FJP logging program to do that and would be greatly interested if I could automatically log to DSBase. Thanks, Greg, WB2BIN -----Original Message----- From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of ks4v at comcast.net Sent: Wednesday, November 27, 2019 11:01 PM To: Crownhaven; dxbase at mailman.qth.net; dxbase at yahoogroups.com; wa6axe at verizon.net Subject: Re: [Dxbase] Bridging WSJT/X Yes, I use it every day.BruceKS4V -------- Original message --------From: Crownhaven Date: 11/27/19 5:53 PM (GMT-06:00) To: dxbase at mailman.qth.net, dxbase at yahoogroups.com, wa6axe at verizon.net Subject: [Dxbase] Bridging WSJT/X I know at one time there was program written by Joe G to bridge logging from FLDIGI into DXB. Does such an animal exist for WSJT/X?ThanksSteve, N4JQQ______________________________________________________________Dxbase mailing listHome: http://mailman.qth.net/mailman/listinfo/dxbaseHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Dxbase at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html