From wa6axe at verizon.net  Fri May  3 10:12:26 2019
From: wa6axe at verizon.net (Joseph Glockner)
Date: Fri, 3 May 2019 14:12:26 +0000 (UTC)
Subject: [Dxbase] Heads-up on Operations using the callsign TX2A (Ambiguous
	Prefix)
References: <2039979681.4291625.1556892746755.ref@mail.yahoo.com>
Message-ID: <2039979681.4291625.1556892746755@mail.yahoo.com>

Just a heads-up about a callsign that are in the AMBIGUOUS category for Prefixes ...

// TX2A //

Just saw that the callsign TX2A will be used from? Raivavae? (OC-114),
Austral Islands on 23-29 July 2019 (including participation in the? IOTA
Contest). This callsign will default to France(F) because of the Alias Map table mapping.

This callsign is not currently MAPPED in the CALLMAP table -- so, if you want,
simply make a dummy QSO with this callsign and change the PREFIX column
of your logbook mdb file to FO/A and then when the pop-up asks you if you want
to save this TX2A mapped to FO/A -- say YES/OK ---- Then delete that dummy QSO ..

The CALLMAP table will now be updated in advance so that if you work this
station -- it will have the correct PREFIX in your logbook QSO window ...

73 Joe WA6AXE

From kb1fj at comcast.net  Sun May 12 10:14:20 2019
From: kb1fj at comcast.net (kb1fj Akins)
Date: Sun, 12 May 2019 10:14:20 -0400 (EDT)
Subject: [Dxbase] Internet cluster
Message-ID: <98615123.33568.1557670460993@connect.xfinity.com>

I used to have VE7CC.NET running separately and was able to control things ok.  But not I am trying to run ve7cc-1 listed in the IP Host.  I cannot figure how to control anything.  I currently am only getting CW Spots on all bands.  If anyone could clue me in on what to do I would appreciate it.


Thanks,

73, KB1FJ

From fred at g4bwp.com  Sun May 12 10:23:44 2019
From: fred at g4bwp.com (Fred Handscombe)
Date: Sun, 12 May 2019 14:23:44 +0000
Subject: [Dxbase] Fw: Re: DXB radio.ini
Message-ID: <em52c4906c-3ae9-41e4-bf21-b651d23e4a06@fredsshack>

Ben

Comcast is now bouncing my mails to you as if they are spam?

Tried to send a screen shot of my Radio 1 but rejected

73 Fred
G4BWP

www.g4bwp.com
Hoarder of fine valved radios

------ Forwarded Message ------
From: "Ben Akins" <kb1fj at comcast.net>
To: "Fred Handscombe" <fred at g4bwp.com>
Sent: 12/05/2019 13:53:44
Subject: Re: DXB radio.ini

Good morning, Fred,

Joe and I are wondering what your setup is for radio one.

Ben




From dl9mfu at gmx.de  Wed May 15 00:11:45 2019
From: dl9mfu at gmx.de (dl9mfu at gmx.de)
Date: Wed, 15 May 2019 11:11:45 +0700
Subject: [Dxbase] Internet cluster
Message-ID: <op.z1tclvyns5j8ha@dsl>

Akins,
check your setting at
Tools-Options-User Options-Alerts
Maybe there are only CW alerts checked.
73 Helmut
HS0ZIV

From gyates at dreamscape.com  Sun May 19 20:50:35 2019
From: gyates at dreamscape.com (gyates at dreamscape.com)
Date: Sun, 19 May 2019 20:50:35 -0400
Subject: [Dxbase] DXBase and IC7610
Message-ID: <000001d50ea6$09d40eb0$1d7c2c10$@dreamscape.com>

Is any one using DXBase with an IC7610?  If so, would you share your
settings?  I have been trying to get DXBase to talk to 7610 without any
success.

 

 

Thanks,

 

Greg, WB2BIN


From k1ep.list at gmail.com  Mon May 20 08:50:57 2019
From: k1ep.list at gmail.com (Ed K1EP)
Date: Mon, 20 May 2019 08:50:57 -0400
Subject: [Dxbase] DXBase and IC7610
In-Reply-To: <000001d50ea6$09d40eb0$1d7c2c10$@dreamscape.com>
References: <000001d50ea6$09d40eb0$1d7c2c10$@dreamscape.com>
Message-ID: <CAKR4uUOgawP3A6sHt-X35ykSgo2O8dffz7UuJH5015YT6H+rnw@mail.gmail.com>

I would think it would be like any other Icom. Just change the radio ID to
be compatible with an existing Icom in Dxbase.

On Sun, May 19, 2019, 20:50 <gyates at dreamscape.com> wrote:

> Is any one using DXBase with an IC7610?  If so, would you share your
> settings?  I have been trying to get DXBase to talk to 7610 without any
> success.
>
>
>
>
>
> Thanks,
>
>
>
> Greg, WB2BIN
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

From fred at g4bwp.com  Mon May 20 09:12:49 2019
From: fred at g4bwp.com (Fred Handscombe)
Date: Mon, 20 May 2019 13:12:49 +0000
Subject: [Dxbase] DXBase and IC7610
In-Reply-To: <000001d50ea6$09d40eb0$1d7c2c10$@dreamscape.com>
References: <000001d50ea6$09d40eb0$1d7c2c10$@dreamscape.com>
Message-ID: <em61ffaad7-1813-4d8e-95f0-91ea5adae7f8@fredsshack>

Greg

Cut and paste all the below into "RADIOS.INI" found in your DXBase2007 
install directory

Make a backup first of course

73 Fred
G4BWP

www.g4bwp.com
Hoarder of fine valved radios

[ICOM_IC-7610]
#IC-7610 revision by WA6AXE
P_LSB=0
P_USB=1
P_CW_USB=0
P_CW_LSB=0
P_AM=2
P_FM=5
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=4
P_RTTY=4
P_PACKET=4
P_CWR=3

LSB=0
USB=1
AM=2
CW=3
FSK=4
RTTY=4
FM=5
CWR=3
HIGH=1
MEDIUM=2
LOW=2
Address=0x98

PACING=5
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0

DefaultCW=3
DefaultFSK=4
DefaultRTTY=4
DefaultFM=5
DefaultAM=2
DefaultCWR=3

SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d0) hex(fd) 
eoc(100)
SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd) 
eoc(100)
GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) 
eoc(100)
PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)

SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d1) hex(fd) 
eoc(100)
SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd) 
eoc(100)
GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) 
eoc(100)
PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0)

SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd) 
eoc(100)
GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) 
eoc(100)
PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)

SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter") 
hex(fd) eoc(100)
GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100)
PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode 
%filter") hex(fd) eoc(0)

SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(c0) hex(fd) 
eoc(100) hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd) 
eoc(100)
GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(17) hex(fd) rrs(12) 
eoc(100)
PrsSplit= hex(%dummy, 10) bit(%split, 0) hex(%dummy) eoc(0)


------ Original Message ------
From: gyates at dreamscape.com
To: dxbase at mailman.qth.net
Sent: 20/05/2019 01:50:35
Subject: [Dxbase] DXBase and IC7610

>Is any one using DXBase with an IC7610?  If so, would you share your
>settings?  I have been trying to get DXBase to talk to 7610 without any
>success.
>
>
>
>
>
>Thanks,
>
>
>
>Greg, WB2BIN
>
>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html