[Dxbase] SAT users with DXbase2007 -- pse read

[Joseph Glockner]

For the SAT users with DXbase2007 .. The new Satellite  QO-100  has caused 
a slight problem for DXbase2007 ...
The SAT field in DXbase2007 was / is limited to 5 characters .. SO, QO-100 can NOTbe used in the SATNAMES.dat  file .. You must use QO100 .. 

NOW -- here is the problem ..
For those DXbase2007 users who also use my Autolotw program - I have made anew autolotw program file which changes the QO100 to read QO-100 as I makethe adi file in my program .. The newest Autolotw program file can be downloadedfrom 

https://www.navycthistory.com/wa6axe/2007autolotw270.html

For those DXbase2007 users who ARE NOT using my Autolotw program,When you EXPORT an adi file - and you have QO100 in the SAT column,BE SURE to manually go into the newly made adi file and manually changeQO100 to read QO-100 .. Then you can let TQSL make the TQ8 file..

FOR ALL ::   BE SURE that you have downloaded the NEWEST TQSL program andthe NEWEST config file from the LOTW website..  This newest config file contains the entry for SAT  QO-100.

73 Joe wa6axe