[Dxbase] OmniRig support

[Stein-Roar Brobakken]

I use microham mkii 
Then use have two comports straigth in urouter software.

Best Regards,
Stein-Roar Brobakken
post at lb3re.com
LB3RE K3RAG 
Skype: lb3re.rag

> 11. jun. 2019 kl. 08:23 skrev Ilya Zozin, 4Z1UF <4z1uf at bezeqint.net>:
> 
> Thanks to all who answered. 
> I'm using for years the LPB2 Bridge with everything I need, but when I decided to go FT8- found out that I cannot mate WSJT-X with LPB2. 
> Will look for another solution. 
> 
> 73,
> Ilya, 4Z1UF
> 
> Sent from TypeApp
>> On Jun 10, 2019, at 23:43, Stein-Roar Brobakken <post at lb3re.com> wrote:
>> Hello
>> 
>> I think no, because only straigth comports only!
>> 
>> You can use serial splitter software or comport server 
>> 
>> Best Regards,
>> Stein-Roar Brobakken
>> post at lb3re.com
>> LB3RE K3RAG 
>> Skype: lb3re.rag
>> 
>>>  10. jun. 2019 kl. 21:45 skrev Ilya Zozin,4Z1UF <4z1uf at bezeqint.net>:
>>>  
>>>  Hello all,
>>>  Does DXbase2007 works with OmniRig?
>>>  
>>>  Thanks and 73,
>>>  Ilya, 4Z1UF
>>>  
>>> 
>>>  Dxbase mailing list
>>>  Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>>  Help: http://mailman.qth.net/mmfaq.htm
>>>  Post: mailto:Dxbase at mailman.qth.net
>>>  
>>>  This list hosted by: http://www.qsl.net
>>>  Please help support this email list: http://www.qsl.net/donate.html